Hunt Day 10 - Saturday, 21 NOV Morning on the Course

Alex's uncle Dave and cousin Craig joined us this morning for their first ever deer hunt.  They had been out before, but just as observers.  This time they carried licenses and firearms.

We hit the golf course at 6:40 am.  It was a pleasant 30 F with only a slight breeze from the E (yes, from the E, not the prevailing W-SW).

Dave and I sat on 'over-watch' above Hole #5.  Alex and Craig took the bottoms on Hole #15.  I suspect they did so to get out of the wind, because they don't have their Man Cards yet.

We sat for two hours.  We saw red-tailed hawks and squirrels but no deer.  The snow did start to fall.  Not much was sticking to the ground, but it was falling.  It was quite the beautiful morning to be in the woods.

Dave and I relocated to Hole #17 and dropped our gear.  We then walked E to the boys.  We pushed out 3 doe, but they ran by at Mach 2.8 - which is just barely too fast to make a shot.  Wisely the boys opted to pass.  They saw deer, but no shots were taken.

We returned to the truck to quench our parched throats before heading off.  Normally, the course will open at 10 am and we, the hunters, need to be absent (as in present no longer at that time).  Today however, it appears as though the course will not open.  It's just too nasty out for golfers - or perfect out for hunters.

Dave Martin on over-watch


Alex, Craig, and Dave Martin @ Hole #15


A huge shout out to our sponsors of this hunt:  Mt. Dew & Modelo
Look closely, you can see the snow blowing across the photo from the right side (East)

And yes, if you are caught up on your blog post reading, this photos were NOT taken by the Samsung Galaxy Note 3 - but by the new & improved (and also well protected) Samsung S6 Active. 

Comments

Post a Comment

Popular posts from this blog

Cleaning Winchester SX3 / SX4 Shotguns

Image
The Winchester SX4 is my Go To shotgun for everything - clays, doves, ducks, geese, pheasants, whatever.  It is an awesome firearm.  The drawback?  There are multiple moving parts and a few of them like to collect carbon.  And this carbon sticks as if it were put on those parts with super glue! Specifically, the magazine tube and the gas piston are the main carbon collectors.  Those parts come out more black than silver & gold. The inner components of an SX3 / SX4 with highlights where carbon will form So what is my trick for cleaning those bits?  I drop the gas piston into my Hornady sonic cleaner.  Inside the cleaner I put in about a cup of Hornady's One Shot Sonic Clean Solution for gun parts, add some DI water, a couple squirts of Dawn liquid dish soap, and then top it off with a dash or two of the citrus version of Dr. Bronner's pure castile liquid soap.  I have found that the citrus Dr. Bronner's is awesome at removing grease and oil....
Read more

Winchester SX4 Trigger Assembly Update

Image
First, you need to read the post immediately before this one to understand why I had to take my Winchester SX4 shotgun apart - all the way apart - specifically the trigger assembly. Second, my bad.  I had neglected to clean the gun after returning from last October's pheasant trip.  I had about one bale of grass seed inside that gun, which in the end, may have kept the #8 pellet from getting out on its own.  Shame. Finally, I did not give up.  I watched four different YouTube videos on how to disassemble and reassemble the trigger group.  Sadly, no one did the SX4, only the previous version, the SX3.  Close enough.  Why did it take 4 videos?  Because no one explained HOW the damn sear goes back in.  Everyone either ASSUMED we all know how OR in two cases, the reassembly process was out of the camera frame.  Aggravating! The key, and this is more for me to remember, was on the fourth video, the author said, "The sear kinda slides down int...
Read more

Determine Sex of Deer from Tracks

Image
It IS possible to determine from a set of tracks whether the deer you are tracking is a doe (female) or a buck (male).  And, it's actually pretty simple if you know a few facts about deer. First, you have to know what a deer track looks like.  Deer leave a track that looks like the outline of a heart. Next, you have to know the direction of travel.  Deer are moving toward the "pointy" end of the heart.  So in the above example, the deer is traveling toward the top of this post, or up. Here is an actual photo of deer tracks in the wild so you can get a better idea.  Again, this deer is traveling up, or towards the top of this page.  (It is also clear that this deer was STANDING, not walking - well clear enough to me.  Read on to find out why I know that). Sometimes if the ground is soft or if the deer is traveling really fast (jumping), the track left will show the deer's dew claws at the rear of the direction traveling, like so: The ...
Read more