Of Tree Houses and New Decks

 Had a buddy who wanted to build a tree house for his kids.  Only he didn't have the knowledge nor the tools to make it happen.  Asked for 2 years if I would help.  And now that I am retired, I could help him, so I did.  We spent about 60 hours building this thing.  The main house is 8' x 8' (2.4 meters squared) by 13' (3.97m) high and the landing is 4' square (1.2m square) and 5' (1.5m) tall.  

This is the sketch he had the kids draw.
That's a cargo net that joins the two platforms.

Here's the final product.  Pretty close.
We did wrap the "house" in window screen to form a net to keep the bugs out.
That right there is some good thinking!



We got rid of our hot tub and that left a huge hole in our old deck.  So we ripped it up, put in new joists, and laid down new deck boards.  We also put in a side deck, new walkway, and then planted grass before applying epoxy to the stoop and garage.  It's been an ALL SUMMER job.  Last bit to complete?  New siding on the house.  Here are progress photos...

Demo has started on the old deck.
This is Papaw's "helper"

The old deck torn off.
And no, before you ask, this is not posed.
Sandy actually helped!

Graffiti found on the old joist reads "KDM = Cool"
#False

Sandy attaching new joists.
Again, no, this is not posed.

New joists completed

New deck floor going in

New deck floor complete

Wrap-around stairs complete

New side-deck / platform base about complete

Side deck finished

New brick walkway complete

Epoxy coating down













Comments

  1. AnonymousSeptember 29, 2024 at 7:26 AM

    The deck and tree house projects look great. (Holt)

    ReplyDelete

Post a Comment

Popular posts from this blog

Cleaning Winchester SX3 / SX4 Shotguns

Image
The Winchester SX4 is my Go To shotgun for everything - clays, doves, ducks, geese, pheasants, whatever.  It is an awesome firearm.  The drawback?  There are multiple moving parts and a few of them like to collect carbon.  And this carbon sticks as if it were put on those parts with super glue! Specifically, the magazine tube and the gas piston are the main carbon collectors.  Those parts come out more black than silver & gold. The inner components of an SX3 / SX4 with highlights where carbon will form So what is my trick for cleaning those bits?  I drop the gas piston into my Hornady sonic cleaner.  Inside the cleaner I put in about a cup of Hornady's One Shot Sonic Clean Solution for gun parts, add some DI water, a couple squirts of Dawn liquid dish soap, and then top it off with a dash or two of the citrus version of Dr. Bronner's pure castile liquid soap.  I have found that the citrus Dr. Bronner's is awesome at removing grease and oil....
Read more

Winchester SX4 Trigger Assembly Update

Image
First, you need to read the post immediately before this one to understand why I had to take my Winchester SX4 shotgun apart - all the way apart - specifically the trigger assembly. Second, my bad.  I had neglected to clean the gun after returning from last October's pheasant trip.  I had about one bale of grass seed inside that gun, which in the end, may have kept the #8 pellet from getting out on its own.  Shame. Finally, I did not give up.  I watched four different YouTube videos on how to disassemble and reassemble the trigger group.  Sadly, no one did the SX4, only the previous version, the SX3.  Close enough.  Why did it take 4 videos?  Because no one explained HOW the damn sear goes back in.  Everyone either ASSUMED we all know how OR in two cases, the reassembly process was out of the camera frame.  Aggravating! The key, and this is more for me to remember, was on the fourth video, the author said, "The sear kinda slides down int...
Read more

Determine Sex of Deer from Tracks

Image
It IS possible to determine from a set of tracks whether the deer you are tracking is a doe (female) or a buck (male).  And, it's actually pretty simple if you know a few facts about deer. First, you have to know what a deer track looks like.  Deer leave a track that looks like the outline of a heart. Next, you have to know the direction of travel.  Deer are moving toward the "pointy" end of the heart.  So in the above example, the deer is traveling toward the top of this post, or up. Here is an actual photo of deer tracks in the wild so you can get a better idea.  Again, this deer is traveling up, or towards the top of this page.  (It is also clear that this deer was STANDING, not walking - well clear enough to me.  Read on to find out why I know that). Sometimes if the ground is soft or if the deer is traveling really fast (jumping), the track left will show the deer's dew claws at the rear of the direction traveling, like so: The ...
Read more