Broke In the Range @ 1,000 Yards

It warmed up to about 55 F (13 C) on this fine Saturday, 20 MAR 2021 with a slight 5-8 mph (8-13 kpm) wind coming from NE - E.  Krueger came over about 1400 and we took the Gator out to the range.

We shot in at 100 yards and then worked our way back to 1,000 yards with confirmed hits at 200, 300, 500, 700, 900, and 1,000 yards.

And yes, when we rung steel at 1,000 yards we had a celebratory brewski.

Kruger was shooting his 6XC & his 6.5 Creedmoor.  I was using my .243 with an ATN night vision (IR) scope.  I finally got it zeroed at 100 yards.  It's ready to stalk coyotes in the dark now!

It was really muddy today as we got 2" (5 cm) of rain on Thursday so we did not take the trailer out with the shooting benches.  Instead, Krueger laid prone on his sniper mat and I shot from my Bog Pod tripod.  At 1,000 yards, the elevation would not let us see the target from the ground.  So, we went and got my F150 and we shot out of the bed of the truck.

It's been proven - if you are anywhere on the property, you are in range.

A couple of items left to do yet.  Still need to get the Shot Marker system set up.  Also need to post signage that it is a range.  Then, I need to store my gear in a tote so it's available out there when we need it.  But hey, we're getting there.


Shooting out of the bed of the pickup truck at 1,000 yards.
No, we're not that stupid - gun is unloaded - this is a posed shot after the hit.
The gun on the right in the tripod is for spotting the shots.

At the backstop showing our hits on target from 1,000 yards.


This is a size comparison between a beer can (4.75" - 13 cm tall) and the target.
Yes, this 8" circle is what we hit from 1,000 yards!
That's some pretty good shooting right there.


Comments

Post a Comment

Popular posts from this blog

Cleaning Winchester SX3 / SX4 Shotguns

Image
The Winchester SX4 is my Go To shotgun for everything - clays, doves, ducks, geese, pheasants, whatever.  It is an awesome firearm.  The drawback?  There are multiple moving parts and a few of them like to collect carbon.  And this carbon sticks as if it were put on those parts with super glue! Specifically, the magazine tube and the gas piston are the main carbon collectors.  Those parts come out more black than silver & gold. The inner components of an SX3 / SX4 with highlights where carbon will form So what is my trick for cleaning those bits?  I drop the gas piston into my Hornady sonic cleaner.  Inside the cleaner I put in about a cup of Hornady's One Shot Sonic Clean Solution for gun parts, add some DI water, a couple squirts of Dawn liquid dish soap, and then top it off with a dash or two of the citrus version of Dr. Bronner's pure castile liquid soap.  I have found that the citrus Dr. Bronner's is awesome at removing grease and oil....
Read more

Winchester SX4 Trigger Assembly Update

Image
First, you need to read the post immediately before this one to understand why I had to take my Winchester SX4 shotgun apart - all the way apart - specifically the trigger assembly. Second, my bad.  I had neglected to clean the gun after returning from last October's pheasant trip.  I had about one bale of grass seed inside that gun, which in the end, may have kept the #8 pellet from getting out on its own.  Shame. Finally, I did not give up.  I watched four different YouTube videos on how to disassemble and reassemble the trigger group.  Sadly, no one did the SX4, only the previous version, the SX3.  Close enough.  Why did it take 4 videos?  Because no one explained HOW the damn sear goes back in.  Everyone either ASSUMED we all know how OR in two cases, the reassembly process was out of the camera frame.  Aggravating! The key, and this is more for me to remember, was on the fourth video, the author said, "The sear kinda slides down int...
Read more

Determine Sex of Deer from Tracks

Image
It IS possible to determine from a set of tracks whether the deer you are tracking is a doe (female) or a buck (male).  And, it's actually pretty simple if you know a few facts about deer. First, you have to know what a deer track looks like.  Deer leave a track that looks like the outline of a heart. Next, you have to know the direction of travel.  Deer are moving toward the "pointy" end of the heart.  So in the above example, the deer is traveling toward the top of this post, or up. Here is an actual photo of deer tracks in the wild so you can get a better idea.  Again, this deer is traveling up, or towards the top of this page.  (It is also clear that this deer was STANDING, not walking - well clear enough to me.  Read on to find out why I know that). Sometimes if the ground is soft or if the deer is traveling really fast (jumping), the track left will show the deer's dew claws at the rear of the direction traveling, like so: The ...
Read more